Measurement
and testing of CompactPCI®
assemblies in the 6U Euro-board form factor is greatly facilitated
by the use of this test adapter. Easy access to the DUT is guaranteed
because the adapter has plug-in connections on 3 sides. The Modern
BRIDGE design permits up to 3 CompactPCI®
cards and one standard PCI®
card to be inserted in one CompactPCI®
slot. This allows system developers to implement a large number of
tests with little effort and enables you to achieve vital time to
market.
Our extenders include a PCI Bridge. Some competitor products do not
provide a PCI bridge, thus reducing a extender costs by tolerating
a violation of the PCI specs. Overall PCI compatibility however is
a must in order to achieve total reliability. Please bear these facts
in mind, when comparing prices of PCI Extenders.
The
front and lateral guides securely hold the test specimen. This test
adapter can be easily used even in systems with over length cPCI cards
(depth up to 220 mm).
Additional drivers are not needed. The PCI devices are detected by
standard PCI BIOS.
Ordering
| PCI_300.140 |
CompactPCI
6U 64-Bit Test Extender |
Four
Slot PCI to 6U CompactPCI Adapter Specifications
- 64-bit
bridge with INTEL® 21154AC (33 MHz)
- 6U, 4HP
installation width (depth up to 220mm)
- Full plug-and-play
support
- Automatic
voltage adaptation to 3.3 V / 5 V backplane V(I/O)
- Secondary
V(I/O) adjustable by means of jumper
- Supply
voltage for bridge operation of 5 V (single) from backplane
- LED indicators
for all secondary voltages
- All operating
voltages can be separated for current consumption measurement
- Simple
adaptation to different interrupt tables by means of jumpers
- Geographic
addresses can be individually set for each slot
- JTAG support
- All 315
I/O signals can be individually separated with jumpers
- High-resistance
switching of PCI bus signals via the bridge
- Test specimen
can be plugged in simultaneously with direct PCI connector
- Guided
insertion of test specimens from 3 sides
- EMC-compliant
design
- Specifications:
PCI™ V2.1, PICMG 2.0 R2.1 and R3.0
- 8 GND test
points facilitate measurement on the test specimen
Download
6UcPCI Test Extender datasheet.pdf
